e:cue
e:cue lighting control: control units, servers, output devices, converters, dimmers and software.
-
Sympl SYMPL DMX Node
Two-channel DMX/RDM interface (two DMX512 universes) for e:cue's SYMPHOLIGHT lighting control. IP20 -
Sympl SYMPL E:pix Node
Two-channel e:pix interface (two e:pix universes, 2048 channels) for e:cue's SYMPHOLIGHT lighting control. IP20 -
Sympl SYMPL DALI Node
Single-channel DALI interface for up to 64 DALI devices — linear dimming (DT6), RGB, RGBW and colour temperature (DT8) for e:cue's SYMPHOLIGHT… IP20 -
Sympl SYMPL Input Node
Eight-channel analog input interface (0–10 V; four inputs also 20 mA) for e:cue's SYMPHOLIGHT lighting control. IP20 -
Sympl SYMPL Serial Node
Two-channel serial interface (one RS-232 and one RS-485) for e:cue's SYMPHOLIGHT lighting control. IP20 -
Sympl SYMPL Relay Node
Switching interface with three SPDT relays (up to 5 A / 250 V AC) for e:cue's SYMPHOLIGHT lighting control. IP202.8 W -
Sympl SYMPL Switch
Ethernet switch from the SYMPL range for up to five devices, powering them over Ethernet (PoE) so they need no separate supply. IP202 W -
Sympl SYMPL Pro Node
Eight-channel DMX / e:pix and RDM interface built for tough outdoor environments (8 DMX512 universes, 4096 channels; e:pix version 16384 channels)… IP20 -
Sympl SYMPL Bridge Node
Art-Net / e:net / sACN to DMX / e:pix interface with eight DMX512 / e:pix outputs for e:cue's SYMPHOLIGHT lighting control. IP208 W -
Control Unit LIGHTDRIVE+
Wall-mounted stand-alone DMX512 controller for dynamic lighting: keys and a jog wheel with colour LEDs select colours, intensity and speed, and eight… -
Output Devices Butler PRO DC
e:net to DMX512 and e:pix interface for the e:cue Lighting Application Suite: up to 16 DMX512 universes with full RDM, or 16 e:pix universes (40960… -
Output Devices Butler PRO DMX
e:net to DMX512 interface for the e:cue Lighting Application Suite: up to 16 DMX512 universes with full RDM — the interface for running large numbers… -
Output Devices Butler PRO Epix
e:net to e:pix interface for the e:cue Lighting Application Suite: up to 16 e:pix universes with 2048 channels each. -
Output Devices Butler XT2
DMX/RDM engine that plays back shows programmed with the e:cue software stand-alone, or works as an output device of another e:cue engine. -
Output Devices Butler S2
Compact DMX engine for stand-alone show playback, or as a DMX output device controlled via e:net: 1024 DMX channels in two universes, up to 99 cue… -
Output Devices ETH2DALI
Integrates DALI ballasts, couplers, sensors and switches into e:net: two outputs for up to 128 DALI devices. -
Output Devices Excite+
USB-DMX interface: outputs up to 512 DMX channels from any PC running the e:cue software, or brings external DMX signals into it. IP20 -
Converter Bridge8
Art-Net / sACN to DMX interface with eight DMX512 outputs, supporting up to 32 Art-Net / sACN universes. IP208 W -
Converter Video Micro Converter
Compact converter from DVI video (up to 1080p) to DMX or e:pix for large LED media screens: one VMC grabs up to 4096 pixels, and several can be… -
Software Sympholight 5
e:cue SYMPHOLIGHT 5 — e:cue's lighting control software for designing, programming and running lighting shows and scenes. -
Software Symphotouch
Free app for iOS and Android to control SYMPHOLIGHT installations remotely from a smartphone or tablet. -
Software Lighting Application Suite 7.0
e:cue Lighting Application Suite (LAS) 7.0 — the software suite for programming and running lighting shows with e:cue engines and Butler output… -
Software ActionPad App
App for the ActionPad user interface of the e:cue Lighting Application Suite — on Windows, Android and iOS. -
Output Devices Butler Series
e:cue Butler DMX engines: replay uploaded lighting shows standalone, or act as DMX output devices on e:net. -
Output Devices Butler XT3
DMX/RDM engine for standalone operation: replays lighting shows programmed in e:cue LAS. IP203.5 W -
Converter Converter
e:cue converters and gateways: intelligent translators between external signals and e:cue systems. -
Output Devices DALI 288W Phase cut Dimmer Triac
Two-channel DALI phase-cut dimmer (triac) for LED and conventional lamps, 288 W per output. IP20288 W -
Control Unit DALI Control
e:cue DALI controls for functional lighting: dimmers, relays and touch interfaces in a DALI system. -
Output Devices DALI-2 200W Phase cut Dimmer
DALI-2 dimmer for mains loads: dims and switches LED and conventional lights via DALI or push button. IP20 -
Control Unit DALI-2 Push-Button Coupler
Four-channel DALI-2 push-button coupler: brings existing wall switches into a DALI lighting system. -
Output Devices DMX2CC Dimmer 4CH
Four-channel DMX/RDM constant-current dimmer (common anode) for LED lighting. -
Converter DMX2DALI+
DMX-to-DALI converter: controls DALI ballasts and dimmers from a DMX controller. IP20 -
Output Devices DMX2PWM Dimmer 4CH
Four-channel DMX/RDM constant-voltage PWM dimmer for smooth, high-precision LED dimming. IP20 -
Control Unit Fusion
Modular e:cue controller for functional and dynamic lighting control — or both combined. IP20 -
Output Devices Genius 4CH & 8CH
Relay controller and energy meter in one device: load switching, energy monitoring and power measurement. -
Control Unit Glass Touch GT12X
Glass-fronted wall terminal with touch keys, for DALI-2 and for the Butler XT3 via e:bus2. IP400.15 W -
Control Unit LIGHTDRIVE+ Series
Wall-mounted LIGHTDRIVE+ terminals: standalone DMX512 controllers that play scenes and effects in several zones. -
Control Unit LIGHTDRIVE+ WiFi
Wall-mounted DMX terminal set up via the LIGHTDRIVE+ app: scenes and effects in three zones. IP20 -
Control Unit Light-Drive Elite
Wall-mounted standalone DMX controller with an interactive user interface for dynamic lighting. IP20 -
Control Unit Lighting Control Engine 3 mx
Compact e:cue lighting control server for small and medium-sized projects. -
Control Unit Lighting Control Engine 4
High-performance lighting control server for medium to large projects, with e:cue SYMPHOLIGHT and LAS pre-installed. IP20 -
Control Unit Lighting Control Engine 4 mx
Fanless lighting control server for small to medium and complex projects, with SYMPHOLIGHT and LAS pre-installed. 90 W -
Control Unit Lighting Control Engine 4 turbo
Maximum-performance lighting control server with live video capture, for medium to large projects. IP20 -
Converter RDM Isolator
Isolator with separate power supply: passes DMX, e:pix and RDM signals across a galvanic isolation barrier. -
Output Devices SYMPHO 4x12A DALI-2 Relay
Four-channel DALI-2 relay module (12 A): switches conventional loads within a DALI lighting system. -
Output Devices SYMPHO 4x16A DALI-2 Relay
Four-channel DALI-2 relay module (16 A): controls conventional loads without a DALI input from any DALI system. IP20 -
Control Unit SYMPHO DALI-2 Control Panel
DALI-2 push-button control panel with 2, 4 or 8 buttons, powered from the DALI bus. IP20 -
Control Unit SYMPHO DALI-2 Multi Sensor HF
Ceiling-mounted DALI-2 / D4i multi-sensor with microwave motion detection and light measurement, for high-bay spaces. -
Control Unit SYMPHO DALI-2 Multi Sensor LS/MD
Compact ceiling-mounted DALI-2 multi-sensor with PIR motion detection and light measurement, for low-bay spaces. -
Converter SYMPHOLIGHT Gateway BACnet
Connects SYMPHOLIGHT to a building management system via BACnet. IP201.7 W -
Converter SYMPHOLIGHT Gateway KNX
Connects SYMPHOLIGHT to a building management system via KNX. IP201.9 W -
Sympl SYMPL Core Sp
Standalone engine for e:cue SYMPHOLIGHT, with SYMPL Nodes as interfaces — for small to medium-sized projects. IP20 -
Sympl SYMPL essential2 Node
Eight-universe DMX controller node built for tough outdoor environments, for SYMPHOLIGHT and LAS. IP203.5 W -
Sympl SYMPL essential2 Node m:pix
Eight-channel DMX / m:pix interface for SYMPHOLIGHT, with up to 1536 channels per universe. IP203.5 W -
Sympl SYMPL pixel Node
LED pixel controller for serially addressable strips, dots and boards with individually controllable pixels. IP202 W -
Software
SYMPHOX
SYMPHOX: DALI-2 lighting control that is intuitive and exceptionally easy to commission — no prior DALI knowledge needed. -
Sympl SYMPL Modular Controllers
SYMPL: a scalable, easy-to-install, modular controller range for a wide variety of control tasks. -
Control Unit e:touch 8" & 10"
Touch screen that brings user interaction into the control system via e:cue's SymphoTouch app. IP20
Tell us about your project — let's design its light together.
Call or email us about product selection, layout and control infrastructure.